EasyManuals Logo

Samsung UN40J5200AFXZA User Manual

Samsung UN40J5200AFXZA
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
English - 10
Intermittent Wi-Fi
Check the distance between the TV and the Modem/Router. The distance should not exceed 50ft (15.2 m).
Verify that there are no obstacles between the TV and the Modem/Router.
(The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)
Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see
if it is in good condition. If it is not, replace the cable.
Connect the TV to your Modem/Router using a CAT 7 cable and try to set up a wired network connection.
(MENU > Network > Network Settings).
Check Network Status (MENU > Network > Network Status) to see if the IP address is invalid, for example,
169.x.x.x. If it is, call your ISP to get a valid IP address, and then ask them to check the connection not only
between your Modem and Router but also between the Modem / Router and the Internet.
If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the
Mac addresses of your new Modem/Router and the TV.
Netflix problems
Change the DNS to 8.8.8.8. Select MENU > Network > Network Status > IP Settings > DNS setting > Enter
manually > DNS Server > enter 8.8.8.8 > OK
Verify that the ESN for Netflix is valid. (Go to MENU > Support > Contact Samsung)
Reset Netflix by selecting MENU > Smart Hub > Reset Smart Hub.
Smart Hub error messages
Reset Smart Hub by selecting MENU > Smart Hub > Reset Smart Hub.
Update the TV’s software (MENU > Support > Software Update).
Getting remote support for your TV
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can
remotely:
Diagnose your TV
Adjust the TV settings for you
Perform a factory reset on your TV
Install recommended firmware updates
How does remote support work?
You can easily have a Samsung Tech remotely service your TV:
1. Call the Samsung Contact Center and ask for remote support.
2. Open the menu on your TV and go to the Support section.
3. Select Remote Management, then read and agree to the service agreements. When the PIN screen
appears, provide the PIN number to the agent.
4. The agent will then access your TV. That's it!
[J5500-ZA]BN68-06969A-01ENG.indb 10 2015-02-13 오전 11:10:54

Other manuals for Samsung UN40J5200AFXZA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samsung UN40J5200AFXZA and is the answer not in the manual?

Samsung UN40J5200AFXZA Specifications

General IconGeneral
Screen Typeled
Wall Mount200mm x 200mm
Featuresmotion rate 60, wide color enhancer, anynet, connectshare movie
Tunerdigital
Screen Size40 inches
Closed Captioningyes
Motion Enhancementmotion rate 60
HDRno
Built-In Speakerstrue, downward firing
Surround Sounddolby digital plus
Speakers Output20 watts
USB Ports1
USB 2.0 Ports1
Ethernetyes
RF Antennayes
Bluetoothno
Networkbuilt-in wi-fi, ethernet
Headphones Outputno
Digital Optical Audio Outputs1
Analog Audio Outputs1
Component Video Inputs1
Composite Video Inputs1
DVI0
VGA Ports0
Remote Controlsmart
3Dno
Power Consumption93 kilowatt hours
Depth with Stand11.3 inches
Height with Stand23.2 inches
Width with Stand36.3 inches
Net Weight with Stand16.3 pounds
Depth without Stand2.3 inches
Height without Stand20.6 inches
Net Weight without Stand14.1 pounds

Related product manuals