English - 10
Connecting to an Audio Device
Using an Optical (Digital) Cable Connection and a Standard Stereo Cable Connection
Use with Digital Audio Systems, Amplifiers, and Home Theaters.
✎
DIGITAL AUDIO OUT (OPTICAL)
• When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack,
decrease the volume of both the TV and the system.
• 5.1 CH (channel) audio is available when you connect the TV to an external device supporting
5.1 CH.
• When the receiver (home theater) is set to on, you can hear sound output from the TV’s
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the
home theater receiver. When the source is a digital component such as a DVD player / Blu-
ray player / cable box / STB (Set-Top Box) satellite receiver and you connected it to the TV via
HDMI, you will only hear 2 CH audio from the home theater receiver. If you want to hear 5.1
CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB
satellite receiver directly to an amplifier or home theater.
✎
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
• When connecting, use the appropriate connector.
• When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the
TV and adjust the volume level with the amplifier’s volume control.
OPTICAL
To Next Page
Loading...
