English - 18
4
Software Upgrade:
Upgrading the
software to the latest
version
✎
To upgrade later,
select Skip.
When the Network Settings is complete, your TV will check for a
new software version automatically. If new software is available, the
TV downloads and installs the new software. When the download is
complete, select Next.
✎
If you want to upgrade later, select Skip. For more information, refer
to Software Update (Preference Features → Support Menu) in the
e-Manual.
✎
This may take some time, depending on your network status.
✎
You can only upgrade software if your TV has an active network
connection.
✎
If no new update software is available, a the no new updates
message appears on the screen. Select OK.
5
Auto Program (1):
Select where your TV
signal comes from.
Select the appropriate option for your TV using your remote, and then
select Next.
• Yes, I need to.: Select if you have an antenna or a cable connection
without a set-top box. If you select this option, go to 6- Auto Program
(2) Step.
• No, I don’t need to.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Program. If you select this option,
go to 8 - Clock on the next page.
6
Auto Program (2):
Select the search
options.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. When done, select Next.
[UE6500-ZS]BN68-04087B-02.indb 18 2012-04-18 �� 9:04:13
To Next Page
Loading...
