Samsung VC240

Rear - Connecting Cables
Computer/
Ordinateur
DVI IN
POWERPOWER S/W RGB IN
DVI IN
RGB IN
AUDIO IN
AUDIO
SERVICE
Computer/
Ordinateur
Hub/
Concentrateur
LANPOWERPOWER S/W LAN
MIC
• Connect it only when needed, since this product has an internal speaker.
• Connect it only when needed, since this product has an internal micro
phone.
• Note that MIC can only be used for a video call.
• Ensure that only one of the two [LAN] ports is connected to the network
using a LAN cable.
System Conguration
See the User’s Manual for further instructions for installation and adjustment.
Powered by:
Connecting with a PC1
Connecting to the video conference monitor
2
Main Menu
Initialization Message
Getting Started
Turn on the VC240 using the Power S/W. A power up message with Samsung and RADVISION logos
appears on the screen until completion of the initialization phase. Using the VC240 remote control
press the Menu/OK button to enter the Menu.
1
Set up the Language
Select the Setup option on the Menu. Select General – Language
then select language from list
2
LAN Conguration
Select Network – IP Settings to set your IP. Select Network – Network
Preference to set up H.323 or SIP as preferred network
.
3