Samsung VM46B-U

53
Message Display
MENU m → OnScreen Display → Message Display → ENTER E
Source Info
Select whether to display the source OSD when the input source changes.
• Off / On
No Signal Message
Select whether to display the no-signal OSD when no signal is detected.
• Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
• Off / On
Menu Language
MENU m → OnScreen Display → Menu Language → ENTER E
Set the menu language.
―
A change to the language setting will only be applied to the onscreen menu display. It will
not be applied to other functions on your PC.
Reset OnScreen Display
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
This option returns the current settings under OnScreen Display to the default factory
settings.