17
Connection Using an IR Stereo Cable (sold
separately)
Make sure to connect the External IR cable while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
• Connect the IR OUT port on the product to the IR IN port on the other
display product using the dedicated stereo cable.
• A command sent from the remote control pointed at product
1
will
be received by both display products
1
and
2
.
―
The appearance may differ depending on the product.
1 2
IR OUT
IR IN
Controlling more than one display product using an
External IR cable
• A command sent from the remote control pointed at product
1
(to
which the External IR cable is connected) will be received by both
display products
1
and
2
.
―
The appearance may differ depending on the product.
―
The external IR cable can be placed on the side of the product as long as
the cable length permits.
1 2
IR OUT
IR IN
IR IN
To Next Page
Loading...
Need help?
General
