24
Connecting to a Video Device
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
• You can connect a video device to the product using a cable.
―
Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable
―
Audio will not be enabled if the product is connected to a video device using an HDMI-DVI
cable. To resolve this, additionally connect an audio cable to the audio ports on the product
and video device.
―
Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
―
Make sure to connect the same colour connectors together. (white to white, red to red, etc.)
―
Connecting parts may differ in different products.
HDMI IN 1, HDMI IN 2
AUDIO IN
To Next Page
Loading...
