Samsung VR400PVR400PC - Page 41

1-10
Samsung Electronics
Disassembly and Reassembly
1-2-13 Lever S, T Brake Ass’y Removal
1) Release the Hook [A] and the Hook [B], [C] in the
direction of arrow as shown in Fig. 1-16.
2) Lift the Lever S, T Brake AssÕy Œ, ´ with Spring
Brake ˇ.
Assembly :
1) Assembly the Lever S Brake AssÕy Œ on the Main
Base.
2) Assembly the Lever T Brake AssÕy ´ with Spring
Brake ˇ.
Note : Take extreme care not to be folded and trans-
formed spring Brake at removing or reinstalling.
ˇ SPRING BRAKE
´ LEVER T BRAKE ASS'Y
ΠLEVER S BRAKE ASS'Y
HOOK [A]
HOOK [C]
HOOK [B]
1-2-14 Lever Idle Ass’y Removal
1) Push the Lever Idle Πin the direction of arrow
ÒAÓ, ÒBÓ.
2) Lift the Lever Idle Œ.
Assembly :
1) Apply oil in two Bosses of Lever Idle Œ.
2) Assemble the Gear Idle ´ with the Lever Idle Œ.
Note : When replacing the Gear Idle ´, be sure to
add oil in the boss of Lever Idle Œ.
ΠLEVER IDLE
´ GEAR IDLE
´ GEAR IDLE
HOOK [A]
"A"
"B"
Fig. 1-16 Lever S, T Brake Ass’y Removal
Fig. 1-17 Lever Idle Ass’y Removal