10_ Setting up your washer
Poseidon-MAX.indd 10 2007-09-17 ¿ÀÈÄ 7:01:16
Heavy course
Use this course for big volume laundry items such as blankets and bed cover sheets.
1. Press the Power button to turn the washer “On”.
2. Press the Course select button.
3. Press the Start/Pasue button. The water level is selected automatically.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
•
Do not wash electric blankets and carpets.
• Fold big volume laundry items (blankets and
bed cover sheets) in the following way before
adding them into the spin basket.
•
Purchase a laundry net for light and big
volume laundry items (e.g. cashmere,
blankets) as they may rise to the top of the
washer and become damaged.
Wool course
Use this course to wash woolen items such as washable sweaters, cardigans, and other woolen
items.
1. Press the Power button to turn the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
• The Air Turbo and Silver Wash functions cannot be selected for the Wool course.
• Do not use hot water (over 30C) for washing wool.
• Refer to the Care Label on the clothing for the appropriate wash information.
• Make sure buttons are fastened and that clothing is turned inside out.
• Use only detergent indicated by the laundry.
• When the laundry is extremely dirty, soak the laundry for about 10 minutes before
pressing the Wool course button to increase the wash efficiency.
The wool wash course of this machine has been approved by Woolmark for the
washing of machine washable Woolmark products provided that the products are
washed according to the instructions on the garment label and those issued by the
manufacturer of this washer, M0509.
Digital course
Use this course to automatically select the optimal washing course.
1. Press the Power button to turn the washer “On”.
2. Press the Start/Pause button. The water level is selected automatically.
3. The wash, rinse, and spin cycles follow.
4. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
5. Close the lid.
To Next Page
Loading...
