12_ Setting up your washer
Poseidon-MAX.indd 12 2007-09-17 ¿ÀÈÄ 7:01:19
Air Turbo
This course saves you valuable time, ensuring that your clothes dry faster than from line drying.
1. Press the Power button turning the washer “On”.
2. Press the Air Turbo button.
Each time the Air Turbo button is pressed, the operations are performed in the following
order: 30min OFF 30min
3. Close the lid.
4. Press the Start/Pause button.
• This can be selected as an additional option for all courses except Wool and Delicate
course.
• The Air Turbo function is only available when SPIN is selected.
• Select this when you want to half-dry the laundry.
Aqua Preserve (Selected models)
Water saving function reduces water consumption by reusing water from last rinse cycle.
1. Press the Power button to turn the washing machine.
2. Press the Aqua Preserve button.
3. Close the lid.
4. Press the Start / Pause button.
• This program can be selected as an additional option in all programs except in Spin,
Wool and delicate.
• To use the water in the rinse cycle after the Aqua Preserve program, select the Spin program.
Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1. Press the Power button to turn the washer “On”.
2. Press the Delay Start button once.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3. Press the Start/Pause button and add the appropriate amount of detergent into the tub.
4. Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
• Detergent must be added into the detergent drawer.
• If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
• To cancel a Delay Start, press the Power button.
To Next Page
Loading...
