Setting up your washer _11
01 Setting up your washer
Poseidon-MAX.indd 11 2007-09-17 ¿ÀÈÄ 7:01:18
Quick course
The Quick course is good for light or slightly stained laundry.
1. Press the Power button turning the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button. The water level is selected automatically.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
Delicate course
Use this course to wash delicate clothing items.
1. Press the Power button turning the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button. The water level is selected automatically.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
• You cannot select Hot/Cold water.
• The last spin cycle is a light cycle to prevent wrinkles.
• Use the detergent indicated by the laundry item.
In the Delicate course, Air Turbo cannot be selected as it may damage delicate items.
Super Clean (Selected Models)
Use this course to achieve the cleanest wash.
This course automatically adjusts the water temperature, the water level, the washing time and
the power ensuring the optimal wash performance through the 5-step super clean system.
1. Press the Power button to turn the washer “On”.
2. Press the Super Clean select button.
3. Press the Start/Pause button.
4. Add the appropriate amount of detergent. The 5 steps of Deep Soaking, Soaking, Stain
Dissolving, Stain Separating, and Deep Cleaning follow.
5.
Close the Lid.
Soak program
Use this program to remove stains from clothes more efficiently making it a time to soak.
1. Press the Power button to turn the washing machine.
2. Press the Program selection.
3. Press the Start / Pause button.
4. Cycles are done washing, rinsing and spinning.
5. To stop a program, press the Start / Pause button again. Once the
washing machine has stopped, you can change the program.
6. Close the lid.
To Next Page
Loading...
