Setting up your washer _17
Waterdrop mark Cause How to level
The front of the
washer is lower
Level the washer by adjusting the legs.
The back of the
washer is lower Adjust the height by using the props at the back.
The left of the
washer is lower
Adjust the left side by using the adjustable legs at
the front and props at the back.
The right of the
washer is lower
Adjust the left side by using the adjustable legs at
the front and props at the back.
Adjusting the height of the washer
Make sure your washer is level by adjusting the leveling legs.
Beware of catching your hands under the legs.
1. Pull the handles located at the right and left front of the washer
and slide them off.
2. Adjust the height of the machine upwards or downwards.
3. When you have finished adjusting the height, push the handles
back to fix the adjusting legs in place.
rehsaw ruoy pu gnitteS 20
CAUTION
Poseidon-MAX.indd 19 2007-09-17 ¿ÀÈÄ 7:01:42
To Next Page
Loading...
