English 25
Installation
3. If the washer is level, the pulsator (A) is
positioned at the center of the water as
shown in the gure.
If not, level your washer by turning
the front leveling feet clockwise or
counterclockwise as necessary.
NOTE
• Turn the front leveling feet clockwise
(B) to lower the washer, and
counterclockwise (C) to raise the washer.
• Number of leveling feet may differ
depending on the models.
WA3200T_DC68-03850D-02_EN.indd 25WA3200T DC68-03850D-02 EN indd 25 2020-11-12 2:44:052020-11-12 2:44:05
To Next Page
Loading...
