Samsung WA44A32 A Series - Page 54

54 English
Troubleshooting
Troubleshooting
No Code Meaning
11 LC
Check the drain hose.
• Make sure the end of the drain hose is placed on the oor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays “LC”, the washer do draining for
3 minutes. During this time, the POWER button is inoperative.
12 OC
Water is overowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
13 PC
When position of the clutch can't be detected.
• If the information code remains, contact a customer service
centre.
14 PC1
After position of the clutch is detected, if the signal of the clutch
hall goes wrong.
• If the information code remains, contact a customer service
centre.
15 Ub
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a at, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the nal spin
result might be unsatisfactory, and an “Ub” check message
will be
1. shown in the display.
16 Ur
Additional rinsing.
• Show additional rinsing in sensing unbalance.
• Method of releasing the display.
Any key input.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
WA3200T_DC68-03850D-02_EN.indd 54WA3200T DC68-03850D-02 EN indd 54 2020-11-12  2:44:082020-11-12  2:44:08