Samsung WA50F9A8DSP/A2 User Manual

14_ installing your washer
Required dimensions for Installation
IMPORTANT NOTE TO INSTALLER
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation Flow chart
STEP 1 Selecting a Location
Before you install the washer, make sure the location:
• Hasahard,levelsurfacewithoutcarpetingorooringthatmayobstructventilation.
• Isawayfromdirectsunlight.
• Hasadequateventilation.
• Isnotexposedtofreezingtemperatures(temperaturesunder32°For0°C).
• Isawayfromheatsourcessuchasoilorgas.
• Hasenoughspacesothatthewasherdoesn’trestonitspowercord.
installing your washer
27.0 in.
(68.6 cm)
43.9 in
(111.4 cm)
39.3in
(99.9 cm)
29.3 in
(74.4 cm)
29.3 in
(74.4 cm)
43.9 in
(111.4 cm)
58.1 in
(147.5 cm)
Closet or Door
48 in.² *
(310 cm²)
24 in.² *
(155 cm²)
3 in.
(7.6 cm)
3 in.
(7.6 cm)
*Required spacing
Selecting
a location
Removing the
shipping bolts
(*Drum only)
Adjusting the
levelling feet
Connecting the water
and the drain
[Running a test cycle]
Run a test cycle(Rinse+Spin)
with small amount of laundary
(about 4~5 Towels)
Running
a Calibration
mode
Powering your
washing machine
Finish the
installation
Does a
Laundary machine
Vibrate?
No
Yes
Please check again before steps.
F900A WASH_WA50F_USER MANUAL_DC68-03133H_EN.indd 14 2013-1-23 16:48:45

Samsung WA50F9A8DSP/A2 Specifications

General

Brand	Samsung
Model	WA50F9A8DSP/A2
Category	Washer
Language	English