Required dimensions for Installation
27.0in.
(68.6cm)
- 43!9in
(111.4cm)
39.3in I
58.1 in
147.5 cm)
_r
*Required spacing
IMPORTANT NOTE TO INSTALLER
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation Flow chart
No
ps,
Yes
STEP 1 Selecting a Location
_ Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn't rest on its power cord.
14 installing your washer
To Next Page
Loading...
