PURE CYCLE TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur
inside the washing machine.
1. Press the Power button.
2. Select the Pure Cycle TM course.
• Once the Pure CycleTM course is selected, the only function
that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle begins.
Heavy Outy_Perm Press
Colors / DarksT_ f _Active Wear
Towels _/ \__ Delicates /
// _\.a_Wa,h
, ,aotw r./ Woo,
Sanitize _\ //qUiCk Wash
AquaJet '_
Heavy Duty __Perm Press
Colors / Darks--/f "_--Active Wear
Towels_/ \___ Delicates I
7/ _- Hand'Wash
'o'antW II l}--Woo'
ooo,c,0 .,\ W0.h
AquaJet "
Heavy Duty__Perm Press
Colors / Darks--/f _Active Wear
Towels_/ \_._ Delicates /
I/ \_ Hand Wash
,° ontWe r,/ Ill. Wash
Beddings\ /IL_Spin
P_e ACYCl_]'t?_ 1- Rinse+Spin
_, Using Pure Cycle, you can clean the drum without
OAUT,O, using a cleansing agent.
[_, Never use Pure Cycle when laundry is in the washing / DoorLock
f
machine. This may cause damage to the laundry or a _=_ChildLock
problem with the washing machine. [_ GarmentPlus
The Pure Cycle Auto Indicator Function _ PureCycle
Wash Rinse Spin End
• If the "Pure Cycle" is lit after a wash, it indicates that tub (drum) cleaning is required. In this
case, remove the laundry from the washing machine, turn the power on, and clean the drum
by running Pure Cycle.
• If you do not run Pure Cycle, the "Pure Cycle TM''indicator turns off. However, the "Pure
Cycle TM''indicator will light again after two washes. Not running Pure Cycle at this point will
not cause a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a month or so, the frequency may differ
depending on the number of times the washing machine is used.
30 maintainng your washer
To Next Page
Loading...
