_Cl
Mems sensor problem.
Temperature sensor problem.
A fault is detected in the water
level sensor.
This occurs when the temperature
exceeds 50, for over 8 seconds in
the Wool and Delicates course.
Call for service.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
When position of the clutch can't Call for service
be detected.
After position of the clutch is Call for service
detected, if the signal of the clutch
hall goes wrong, occurs error.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
To Next Page
Loading...
