What to do if detergent remains in the dispenser of my Samsung WA50N7350A?
If detergent remains in the automatic dispenser of your Samsung Washer after the wash cycle, ensure that your washer is running with sufficient water pressure.
What to do if Samsung WA50N7350A stops mid-cycle?
If your Samsung washer stops, ensure the power cord is plugged into a working outlet and check the fuse or circuit breaker. Close the lid properly and press the Start/Pause button. Remember, the washer won't spin with an open lid for safety. It may make clicking noises and do a quick drain before filling. There might be a pause or soak period in the cycle, so allow it some time to continue. Also, inspect the inlet hose screens at the faucets for any obstructions and clean them regularly.
What to do if Samsung Washer stops mid cycle?
If your Samsung washer stops, ensure it's plugged into a working outlet and check the fuse or circuit breaker. Make sure the lid is closed and press Start/Pause. Remember, the washer won't spin with an open lid. The washer clicks to check the lid lock and does a quick drain before filling. Also, some cycles have pauses or soak periods, so wait to see if it resumes. Finally, inspect inlet hose screens for blockages and clean them as needed.
What to do if my Samsung Washer will not start?
If your Samsung Washer won't start, ensure the lid is closed, the washer is plugged in, and the water source faucets are open. Also, press the Start/Pause button and make sure the Child Lock is not activated. Finally, check the fuse or reset the circuit breaker.
Why is my Samsung Washer vibrating or too noisy?
If your Samsung Washer is vibrating excessively or is too noisy, make sure it is placed on a level surface. If the surface is uneven, adjust the washer’s feet to level it. Ensure that the washer is not touching any other objects and that the laundry load inside is balanced.
How to resolve a dC3 error on my Samsung WA50N7350A?
If your Samsung Washer displays a “dC3” error, make sure the Add Door is firmly closed. Then, restart the washer.
What to do if my Samsung WA50N7350A Washer has no water or not enough water?
If your Samsung Washer has no water or not enough water, make sure both faucets are fully turned on. Straighten any kinks in the water inlet hoses to ensure proper water flow. Additionally, disconnect the hoses and clean the screens, as hose filter screens may be clogged.
Why does my Samsung WA50N7350A Washer have no water or not enough water?
If your Samsung Washer isn't filling with enough water, begin by ensuring that both water faucets are completely open. Check the water inlet hoses for any kinks or bends and straighten them out. If the problem persists, disconnect the hoses and inspect the screens for any clogs, cleaning them as necessary.
How to stop my Samsung WA50N7350A Washer from leaking water?
To prevent your Samsung Washer from leaking water, make sure all hose connections are securely tightened. Ensure the end of the drain hose is correctly inserted and properly secured to the drainage system. Avoid overloading the washer and use high-efficiency detergent to prevent excessive suds.
Why won't my Samsung WA50N7350A start?
Your Samsung Washer might not start for several reasons. Ensure the lid is completely closed, the washer is properly plugged into a working outlet, and the water source faucets are fully open. Also, make sure you have pressed the Start/Pause button. Check if the Child Lock is activated. Before the washer fills, it will make clicking noises to check the lid lock and perform a quick drain. Finally, examine the fuse or reset the circuit breaker.
General| Brand | Samsung |
|---|---|
| Type | Top Load Washer |
| Capacity | 5.0 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Wash Cycles | 12 |
| Steam | Yes |
| Water Level | 5 |
| Model | WA50N7350A |
To Next Page