To Next PageTo Next PageWhat to do if my Samsung WA5471AB has a drain error?
If your Samsung Washer displays a drain error, it could be due to a clogged drain hose. Make sure to clear the drain hose. Also, check the water pump connections to ensure the water pump terminal is connected correctly.
Why does my Samsung WA5471AB Washer show an unbalance error?
If your Samsung Washer displays an unbalance error, it is likely due to the laundry load. Find the reason for the imbalance and solve it as directed in the user manual.
Why Samsung WA5471AB will not start?
If your Samsung Washer won't start, here are a few things to check: * Ensure the door is completely closed. * Make sure the washer is properly plugged into a working outlet. * Verify that the water source faucets are fully open. * Press the Start/Pause button to initiate the cycle. * Confirm that the Child Lock feature is not activated. * Check the fuse or reset the circuit breaker.
What to do if Samsung Washer stops mid-cycle?
If your Samsung Washer stops during a cycle, consider these possibilities: * Ensure the power cord is correctly plugged into a working electrical outlet. * Check the fuse or reset the circuit breaker. * Make sure the door is closed completely, and press the Start/Pause button. * The cycle may be in a pause or soak period; allow it some time to resume. * Inspect the inlet hose screens at the faucets for any obstructions.
What to do if my Samsung Washer shows a Door Error?
If your Samsung Washer displays a Door Error, the water level sensor terminal might be out of place. Inspect the MEMS sensor and PBA, and also check the wire connector terminals.
What to do if Samsung WA5471AB stops mid cycle?
If your Samsung Washer stops during a cycle, ensure it's plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Verify the door is fully closed and press the Start/Pause button; the washer won't spin with an open door. Note that the washer makes clicking noises and does a quick drain before filling. There may also be a pause or soak period in the cycle, so allow some time. Lastly, inspect the inlet hose screens for obstructions and clean them if necessary.
What to do if my Samsung Washer has no water?
If your Samsung Washer isn't filling with enough water, begin by ensuring that both water faucets are fully turned on. Next, check that the water inlet hoses are not bent or kinked, and straighten them if necessary. It's also possible that the hose filter screens are clogged; disconnect the hoses and clean the screens. Opening and closing the door before pressing the Start/Pause button can also help.
Why Samsung WA5471AB won't start?
If your Samsung Washer won't start, make sure the door is completely closed and that the appliance is properly plugged into a working outlet. Also, ensure the water source faucets are fully open and that you've pressed the Start/Pause button. It's also worth checking that the Child Lock feature isn't activated. If none of these steps work, inspect the fuse or reset the circuit breaker. Note that before the washer starts filling, it will make clicking noises as it checks the door lock and performs a quick drain.
What to do if Samsung WA5471AB failed to lock the door?
If your Samsung Washer failed to lock the door, close the door tightly and restart the cycle.
What to do if my Samsung Washer is not draining?
If your Samsung Washer is not draining, try the following: * Turn off the unit and turn it on again. * Select only the Spin Cycle. * Press the Start/Pause to drain the water.
General