setting up your washer
CONTROL PANEL
POWER BUTTON
START/PAUSE
BUTTON
PROGRAM SELECT
BUTTON
6
5
4
3
2
1
Fuzzy Speedy Rinse Spin
Each time the button is pressed, the washing program changes;
CHILD-LOCK
FUNCTION
This is a device to protect children from being accidentally hurt while playing
with the washer.
How to start the Child Lock function :
Press the "Power" button to go to an initial washing mode.
By pressing "Start/Pause" button, you start washing and in case Child Lock
function is needed during the laundry.
Press and hold down the Program button for more than 3 seconds to run
the CHILD LOCK feature.
To release the function of Child Lock :
In case the "Child Lock" is programmed, press the "Program" button for 3 seconds.
Note : When the child lock function is ON all LEDs except for that of the selected
Water Level blinks.
WATER LEVEL
BUTTON
AUTO RESTART
The power is turned ON automatically after power failure.
Rinse + Spin Fuzzy
Medium High Extra Low Low Medium
(Option-1)
(Option-2)
To Next Page
Loading...
