6_Setting up your washer
setting up your washer
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
Press this button once to operate. Press it again to turn the power off.
START/PAUSE BUTTON
Use to pause and restart the operation. To change the washing procedure
during an operation, press this button to stop, and again to restart after
changing the procedure.
PROGRAM SELECT BUTTON
Each time the button is pressed, the washing program changes;
Fuzzy blanket Wool / Delicate quick soak Clean tub / Heavy
soil
FILTER CHECK
When the wash is finished, the warning lamp lights up on the filter check.
When the door is opened, it turns off. (This is not a fault.) When the Magic
filter is clogged, foreign materials may start sticking to the laundry. To ensure
a clean wash, please remove foreign materials from the filter after every
wash.
CHILD-LOCK FUNCTION
(OPTION)
This is a device to protect children from being accidentally hurt while playing
with the washer.
• How to start the Child-Lock function:
- Press the “Power” button to go to an initial washing mode.
- By pressing “Start/Pause” button, you start washing and in case Child
Lock function is needed during the laundry
- Press both the “Rinse” and “Spin” buttons at the same times.(for 3
seconds) (Note: You cannot perform the function without the “Power”
button on. If the Child Lock function is activated, the Child Lock icon
blinks.)
• To release the function of Child-Lock: In case the “Child-Lock” is
programmed, press both the “Rinse” and “Spin” buttons at the same
time.
REMAINING TIME, DELAY
START TIME, ERROR DISPLAY
Displays the remaining wash time. Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so that
you can take action.
8 7
6
45 3 2 1910
1
2
3
4
5
6
WA80G5PEP-02898E-02_EN.indd 6 2012-12-18 �� 4:46:11
To Next Page
Loading...
