Shooting in the dark
Shooting options
58
Using the ash
Use the ash when you capture photos in the dark or when you need more light in
your photos.
1
Press [
F
] to pop the ash up when it is need.
2
In Shooting mode, press [
F
].
Exit Set
Flash : Auto
3
Select an option.
Icon Description
O:
•
The ash will not re.
•
The camera will display the shake warning when you are
shooting in low light.
Auto: The ash will re automatically when the subject or
background is dark.
Red-eye:
•
The ash will re twice when the subject or background is dark to
reduce the red-eye eect.
•
There is an interval between the 2 bursts of the ash. Do not move
until the ash res a second time.
Fill in:
•
The ash always res.
•
The camera automatically adjusts the intensity of the ash.
Slow Sync:
•
The ash res and the shutter stays open longer.
•
This option is recommended when you want to capture more
ambient light to reveal more details in the background.
•
Use a tripod to prevent your photos from blurring.
•
The camera will display the shake warning when you are
shooting in low light.
To Next Page
Loading...
