Playback/Editing
82
Editing a video
While playing back a video, you can trim the video or capture an image from the video.
Trimming a video
1
In Playback mode, select a video, and then press [ ].
2
Select Trim Movie.
3
Press [ ] to start playing the video.
4
Press [ ] → [ ] at the point where you want the trimming to
begin.
5
Press [ ] to resume playing the video.
6
Press [ ] → [ ] at the point where you want the trimming to end.
7
Press [ ] to trim.
8
When the pop-up message appears, select Ye s .
•
The original video should be at least 10 seconds long.
•
You can trim videos anywhere between 2 seconds from the beginning and 2
seconds from the end of the video.
•
The camera will save the edited video as a new le and leave the original video
intact.
Capturing an image from video
1
While viewing a video, press [ ] at the point where you want to
capture an image.
2
Press [ ].
•
The resolution of the captured image will be the same as the original video.
•
The captured image is saved as a new le.
To Next Page
Loading...
