How to prevent excessive suds in my Samsung WD53DBA9 H?
If your Samsung Washer/Dryer has excessive suds, make sure you are using the recommended types of detergent as appropriate. Use high-efficiency (HE) detergent to prevent oversudsing, and reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
What to do if Samsung WD53DBA9 H Washer/Dryer does not drain and/or spin?
If your Samsung Washer/Dryer is not draining and/or spinning, ensure the drain hose is not kinked, frozen, or clogged, both between the unit and the drain system and within the drain system itself. Close the door and tap and hold to start. Also, make sure the drain hose is positioned correctly, and clean the drain filter if it's clogged. If the Laundry Combo is not supplied with sufficient power, it will temporarily not drain or spin.
Why is my Samsung Washer/Dryer excessively vibrating or making noise?
If your Samsung Washer/Dryer is making excessive vibrations or noise, make sure it is installed on a level, solid, and non-slippery floor. Adjust the height using the leveling feet if the floor is uneven. Ensure the shipping bolts have been removed and that the Laundry Combo isn't touching any other objects. Check that the laundry load is balanced, and redistribute it if necessary. Remove any items stuck inside the lint filter. Note that the motor can cause noise during normal operation, and metal objects like coins or clothes with metallic decorations can also cause noise.
Why is my Samsung Washer/Dryer leaking water?
If your Samsung Washer/Dryer is leaking water, ensure the door is properly closed and all hose connections are tight. Verify that the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading the appliance and use high-efficiency (HE) detergent to prevent excessive suds. Check the drain hose for any issues.
How to fix a Samsung WD53DBA9 H that does not start?
If your Samsung Washer/Dryer doesn't start, try the following: Ensure the Laundry Combo is plugged in, the door is properly closed, and the water taps are open. Tap the start button and make sure the lock is not activated. Also, check the fuse or reset the circuit breaker, and verify that power is supplied correctly. Before starting, the Laundry Combo will make clicking noises to check the door lock and perform a quick drain. Ensure no laundry is caught in the door and clean the filter if necessary. If low voltage is detected, ensure the power cord is plugged in.
What to do if the door switch lock/unlock is not working properly on my Samsung WD53DBA9 H?
If the door switch lock/unlock is not working properly on your Samsung Washer/Dryer, turn off the Laundry Combo, then turn it on again after 2-3 minutes and try again. The door switch may not be working properly. Check for foreign substances around the door, then push the door closed and try again.
What to do if items are not dried in my Samsung WD53DBA9 H?
If items are not dried by your Samsung Washer/Dryer, check all of the above. Do not overload the Laundry Combo. Dry heavy fabrics separately from light fabrics. The item(s) may be too small and may not get enough spinning inside the drum. Clean the filter and the heat exchanger. If a drain hose is connected, make sure the water is draining properly.
Why does my Samsung Washer/Dryer leave lint on the clothes?
If the clothes have lint on them after using your Samsung Washer/Dryer, always make sure the lint filter is clean before putting items into the Laundry Combo. Some fabrics (such as white towels) cause more lint and should be dried separately from fabrics that lint attaches to easily. Check the inside of the pockets to make sure they are empty before drying.
Why does my Samsung Washer/Dryer keep stopping?
If your Samsung Washer/Dryer stops, plug the power cord into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door, and tap and hold to start the Laundry Combo. Note that there may be a pause or soak period in the cycle. Make sure the mesh filter of the water supply hose at the water taps is not clogged. If the Laundry Combo is not supplied with sufficient power, the Laundry Combo will temporarily not drain or spin.
Why is my Samsung WD53DBA9 H Washer/Dryer load still wet after a cycle?
If your Samsung Washer/Dryer load is wet at the end of a cycle, use the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. Note that a load that is too small can cause this issue. Make sure the drain hose is not kinked or clogged.
General| Brand | Samsung |
|---|---|
| Model | WD53DBA9 H Series |
| Category | Washer/Dryer |
| Language | English |
Explains the importance of reading the manual for safe and efficient operation.
Defines warning symbols (WARNING, CAUTION, NOTE) used in the manual for hazard communication.
Lists essential precautions to reduce risks of fire, electric shock, or injury during appliance use.
Emphasizes installation by qualified technicians to prevent hazards like shock or fire.
Warns about immediate action for flooding, strange noises, smoke, or gas leaks.
Advises on handling foreign substances, glass breakage, water leaks, and drain issues.
Advises against spraying water directly and using strong acidic or chemical cleaning agents.
Details FCC compliance, interference, and radiation exposure statements.
Covers Industry Canada technical specifications, interference, and radiation exposure.
Provides information on obtaining open source software source code for the product.
Instructions for safely unpacking and inspecting the appliance for shipping damage and verifying contents.
Details electrical requirements, grounding, and specifies proper water pressure and tap accessibility.
Specifies minimum clearances for installations and requirements for selecting an appropriate location.
Guides on selecting a location, removing shipping bolts, leveling feet, and connecting hoses.
Guides through first-time setup, language selection, tutorial, and calibration for accurate weight detection.
Advises on sorting laundry by type, emptying pockets, and using laundry nets for proper washing.
Guides on determining load capacity and choosing the correct HE detergent type for optimal cleaning.
Explains usage of auto dispensers, manual bleach compartment, and Aqua Pebble for detergent application.
Explains the components and functions of the appliance's LCD panel and its various icons.
Guides on selecting cycles, changing options like temperature and spin, and starting operations.
Lists and describes available wash, dry, and product care cycles with corresponding charts.
How to access and use appliance settings for Wi-Fi, sounds, display, and system preferences.
Guides on connecting to the SmartThings app for remote control and utilizing its features.
Introduces product care screen for maintenance tips and checking cycle status like Self Clean+.
Procedure for performing Self Clean+ to clean the drum and Self Dry to sterilize and prevent odors.
Steps to drain water in emergencies and guides on cleaning mesh and drain filters.
Guides on cleaning the heat exchanger and the lint filter after each dry cycle for optimal performance.
Guides on preparing for non-use, cleaning the appliance exterior and interior.
Basic checks and suggestions for common issues like the appliance not starting or having water supply problems.
Solutions for excessive vibrations, noise, and problems with draining or spinning.
Troubleshooting for the door not opening, excessive suds, and detergent addition problems.
Explains error codes displayed on the LCD screen and provides corresponding solutions.
Explains symbols for wash cycles, water temperature, heat setting, and bleach instructions.
Lists symbols indicating prohibited laundering actions like do not wash, do not wring, or do not bleach.
Lists technical specifications like water pressure, weight, spin revolution, and power consumption.
Outlines the limited warranty terms for parts, labor, and specific components in the USA.
Details what is not covered by the warranty and limitations on implied warranties for US customers.
Outlines the limited warranty terms for parts, labor, and specific components in Canada.
To Next Page
