How to prevent excessive suds in my Samsung WD53DBA900HZ Washer/Dryer?
If your Samsung Washer/Dryer has excessive suds, make sure you are using the recommended types of detergent as appropriate. Use high-efficiency (HE) detergent to prevent oversudsing, and reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
What to do if Samsung Washer/Dryer does not drain and/or spin?
If your Samsung Washer/Dryer is not draining and/or spinning, ensure the drain hose is not kinked, frozen, or clogged, both between the unit and the drain system and within the drain system itself. Close the door and tap and hold to start. Also, make sure the drain hose is positioned correctly, and clean the drain filter if it's clogged. If the Laundry Combo is not supplied with sufficient power, it will temporarily not drain or spin.
Why is my Samsung WD53DBA900HZ Washer/Dryer excessively vibrating or making noise?
If your Samsung Washer/Dryer is making excessive vibrations or noise, make sure it is installed on a level, solid, and non-slippery floor. Adjust the height using the leveling feet if the floor is uneven. Ensure the shipping bolts have been removed and that the Laundry Combo isn't touching any other objects. Check that the laundry load is balanced, and redistribute it if necessary. Remove any items stuck inside the lint filter. Note that the motor can cause noise during normal operation, and metal objects like coins or clothes with metallic decorations can also cause noise.
Why is my Samsung WD53DBA900HZ Washer/Dryer leaking water?
If your Samsung Washer/Dryer is leaking water, ensure the door is properly closed and all hose connections are tight. Verify that the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading the appliance and use high-efficiency (HE) detergent to prevent excessive suds. Check the drain hose for any issues.
How to fix a Samsung WD53DBA900HZ that does not start?
If your Samsung Washer/Dryer doesn't start, try the following: Ensure the Laundry Combo is plugged in, the door is properly closed, and the water taps are open. Tap the start button and make sure the lock is not activated. Also, check the fuse or reset the circuit breaker, and verify that power is supplied correctly. Before starting, the Laundry Combo will make clicking noises to check the door lock and perform a quick drain. Ensure no laundry is caught in the door and clean the filter if necessary. If low voltage is detected, ensure the power cord is plugged in.
What to do if the door switch lock/unlock is not working properly on my Samsung Washer/Dryer?
If the door switch lock/unlock is not working properly on your Samsung Washer/Dryer, turn off the Laundry Combo, then turn it on again after 2-3 minutes and try again. The door switch may not be working properly. Check for foreign substances around the door, then push the door closed and try again.
What to do if items are not dried in my Samsung WD53DBA900HZ?
If items are not dried by your Samsung Washer/Dryer, check all of the above. Do not overload the Laundry Combo. Dry heavy fabrics separately from light fabrics. The item(s) may be too small and may not get enough spinning inside the drum. Clean the filter and the heat exchanger. If a drain hose is connected, make sure the water is draining properly.
Why does my Samsung WD53DBA900HZ leave lint on the clothes?
If the clothes have lint on them after using your Samsung Washer/Dryer, always make sure the lint filter is clean before putting items into the Laundry Combo. Some fabrics (such as white towels) cause more lint and should be dried separately from fabrics that lint attaches to easily. Check the inside of the pockets to make sure they are empty before drying.
Why does my Samsung Washer/Dryer keep stopping?
If your Samsung Washer/Dryer stops, plug the power cord into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door, and tap and hold to start the Laundry Combo. Note that there may be a pause or soak period in the cycle. Make sure the mesh filter of the water supply hose at the water taps is not clogged. If the Laundry Combo is not supplied with sufficient power, the Laundry Combo will temporarily not drain or spin.
Why is my Samsung Washer/Dryer load still wet after a cycle?
If your Samsung Washer/Dryer load is wet at the end of a cycle, use the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. Note that a load that is too small can cause this issue. Make sure the drain hose is not kinked or clogged.
General| Brand | Samsung |
|---|---|
| Model | WD53DBA900HZ |
| Category | Washer/Dryer |
| Language | English |
Explains the importance of reading safety instructions for safe operation of the appliance.
Lists essential precautions to reduce risks like fire, electric shock, and injury.
Highlights critical warnings related to the appliance's installation by qualified technicians.
Offers cautionary advice for installing the appliance on a stable floor and avoiding vibrations.
Details critical warnings regarding appliance flooding, strange noises, smoke, or gas leaks.
Provides cautions for operating the appliance, including handling foreign substances and water leaks.
Warns against spraying water directly or using harsh cleaning agents on the appliance.
Specifies the electrical requirements, grounding procedures, and warnings for safe power connection.
Details the required water pressure, tap accessibility, and leak checks for the water connection.
Guides through the essential steps of selecting a location and removing shipping bolts.
Provides instructions on sorting laundry, emptying pockets, and using laundry nets.
Guides on selecting and using the appropriate detergent, emphasizing HE detergents.
Explains the function and usage of different detergent dispensers and compartments.
Guides the user through selecting and starting a wash and dry cycle on the appliance.
Provides descriptions of various wash and dry cycles available on the appliance.
Details how to connect and use the SmartThings app for remote control of the appliance.
Covers Wi-Fi connection, app download, and logging into the SmartThings ecosystem.
Explains the Self Clean+ cycle for drum cleaning and odor prevention.
Details the Self Dry cycle for sterilizing and drying the drum to prevent odors.
Offers a checklist of common problems and suggested actions to resolve them.
Lists error codes displayed on the LCD screen and their corresponding solutions for troubleshooting.
To Next Page
