What does error code AC mean on a Samsung WD80J5?
- SstewartjenniferSep 23, 2025
The AC error code on your Samsung washer indicates a communication error. Try powering off and restarting the cycle.

What does error code AC mean on a Samsung WD80J5?
The AC error code on your Samsung washer indicates a communication error. Try powering off and restarting the cycle.
What to do if my Samsung WD80J5 does not drain or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is fully straightened and not kinked. Check the debris filter to make sure it is not clogged. Close the door properly and press the Start/Pause button. Also, ensure the drain hose isn't frozen or clogged, and that it's connected to a drain system that isn't clogged. If there is insufficient power supplied to the washing machine, it may temporarily not drain or spin.
What to do if the door on my Samsung Washer does not open?
If the door on your Samsung washer won't open, first press the Start/Pause button to ensure the washing machine has completely stopped. Allow a few moments for the door lock mechanism to disengage. Note that the door will not open until 3 minutes after the washing machine has stopped or the power has been turned off. Ensure all the water in the drum is drained. If water remains, drain the drum and try opening the door manually. Also, verify that the door lock light is off.
How do I stop my Samsung WD80J5 Washer from leaking water?
To prevent your Samsung washer from leaking water, ensure that the door is properly closed and that all hose connections are tight. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading the machine. Also, use high-efficiency (HE) detergent to prevent excessive suds.
How to reduce excessive suds in my Samsung WD80J5?
To reduce excessive suds in your Samsung washer, make sure the Auto Detergent and Auto Softener settings are properly configured. Use the recommended types of detergent as appropriate, and opt for high-efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
What does error code OC mean on a Samsung WD80J5?
The OC error code on your Samsung washer suggests an overcurrent issue. Try restarting after spinning.
What does the DC error mean on my Samsung Washer?
The DC error on your Samsung washer typically indicates a door issue. Make sure the door is properly closed and that no laundry is caught in the door.
What does error code UB mean on a Samsung Washer?
The UB error code on your Samsung washer indicates an unbalanced load. Make sure laundry is spread out evenly and that the washing machine is on a flat, stable surface. Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory.
Why does my Samsung WD80J5 fill with the wrong water temperature?
If your Samsung washer fills with the wrong water temperature, fully open both taps. Make sure the temperature selection is correct and that the hoses are connected to the correct taps. Flush the water lines. Ensure the water heater is set to supply a minimum of 120 °F (49 °C) hot water at the tap. Disconnect the hoses and clean the mesh filter. The water temperature may change as the automatic temperature control feature checks incoming water temperature, and you may notice just hot or cold water going through the dispenser when cold or warm temperatures are selected.
Why is my laundry load still wet after a Samsung WD80J5 Washer cycle?
If your laundry load is still wet after a cycle in your Samsung washer, try using the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. Small loads (one or two items) may become unbalanced and not spin completely. Also, ensure the drain hose is not kinked or clogged.
Key information and advice on safely operating the washing machine.
Explains the meaning of icons used to denote hazards and precautions.
Essential precautions to reduce risks of fire, electric shock, or injury.
Critical warnings related to the safe installation of the appliance.
Cautions to follow during the installation process to avoid hazards.
Warnings to observe for safe operation and use of the washing machine.
Cautions to follow during everyday use of the washing machine.
Critical warnings to observe when cleaning the appliance.
Guidance on the correct disposal of Waste Electrical and Electronic Equipment.
Lists all components included in the product package for installation.
Outlines necessary electrical, water supply, and drain requirements.
Recommendations for the floor surface to ensure optimal machine performance.
Advises against installing in areas where water may freeze to prevent damage.
Provides minimum clearance requirements for installing in confined spaces.
Detailed steps for properly installing the washing machine.
Steps for initial setup and calibration before the first use.
Guides on running the calibration cycle for accurate weight detection.
Guidelines for sorting laundry, emptying pockets, and using nets.
Instructions on how to use the detergent dispenser compartments correctly.
Instructions for using liquid detergent with the provided container.
Overview of the washing machine's control panel buttons and display.
A quick guide to start a wash cycle with basic operations.
Procedures for using the drying function of the washing machine.
Description and maximum load capacity for each standard washing course.
Explanation of additional options like Intensive, Pre Wash, Bubble Soak.
Details on features like Child Lock and Sound On/Off.
Instructions for performing the Eco Drum Clean cycle to maintain the drum.
Guide to using the Smart Check function for self-diagnosis via an app.
Information on selecting appropriate drying options based on laundry type.
Details on using the Air Wash function for refreshing garments.
Procedure for draining water from the drum in case of a power failure.
Instructions for cleaning the washing machine's surface and mesh filter.
Steps for cleaning the pump filter to prevent clogging and ensure performance.
How to clean the detergent drawer components and recess.
Steps to take if the washing machine freezes due to low temperatures.
Guidance on preparing the machine for long periods of non-use.
A table of common problems and their solutions.
Explains error codes displayed on the screen and how to resolve them.
Explains garment care symbols for washing, bleaching, drying, and ironing.
Advice on environmentally sound disposal and detergent usage.
Technical specifications including model name, dimensions, and power consumption.
Details compliance with EU regulations regarding energy efficiency and consumption.











