English 23
Installation
3. When levelling is complete, tighten the
nuts using the spanner.
CAUTION
When installing the product make sure the
levelling feet is not pressing the power cord.
CAUTION
Make sure all the levelling feet are seating on the oor surface to avoid the washing machine
from moving or generating noise due to vibration Then, check if the washing machine is not
rocking. If the washing machine is not rocking, tighten the nuts.
WD80TA046BE_04200B-03_EN(Indicative).indd 23 2021/2/24 14:58:15
To Next Page
Loading...
