English 25
Installation
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water
hose (B).
2. Use a Phillips screwdriver to loosen four
screws on the adaptor.
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
WD80TA046BE_04200B-03_EN(Indicative).indd 25 2021/2/24 14:58:16
To Next Page
Loading...
