English 27
Installation
For models with an additional hot water inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
Aqua stop hose (applicable models only)
A
The aqua stop hose alerts users of a risk of
water leaks. It senses the water ow and
turns red on the centre indicator (A) in case
of a leak.
NOTE
The end of the aqua stop hose must be tted to the water tap and not the machine.
WD80TA046BE_04200B-03_EN(Indicative).indd 27 2021/2/24 14:58:16
To Next Page
Loading...
