50 English
Maintenance
Maintenance
• Make sure the lter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
Detergent Drawer
1. While holding down the release lever (A)
on the inner of the drawer, slide open
the drawer.
2. Clean the drawer components in owing
water using a soft brush.
3. Clean the drawer recess using a bottle
brush to remove detergent residues and
limescale on the drawer recess.
4. Reinsert the release lever and the liquid
detergent container to the drawer.
5. Slide the drawer inward to close it.
NOTE
To remove remaining detergent, perform the RINSE+SPIN cycle with the drum being empty.
WD80TA046BE_04200B-03_EN(Indicative).indd 50 2021/2/24 14:58:23
To Next Page
Loading...
