washing a load of laundry _27
02 WASHING A LOAD OF LAUNDRY
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfi lling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp. button to select the temperature.
(Cold Water, 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is fi ve.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(max 19 hours in one hour increments). The hour displayed indicates the time at which the
wash will be fi nished.
11. Press the Start/Pause button and the machine will begin the cycle.
WD9102RNW-02665D_EN.indd Sec5:27WD9102RNW-02665D_EN.indd Sec5:27 2011-07-04 10:45:052011-07-04 10:45:05
To Next Page
Loading...
