To Next PageTo Next PageWhat to do if Samsung WF363 load is too wet?
If the load is too wet at the end of the cycle in your Samsung Washer, use the High or Extra High spin speed. Also, use high-efficiency detergent to reduce over–sudsing. Note that a load that is too small can also cause this issue.
Why is there an insufficient amount of water in my Samsung WF363 Washer?
The Front Loading Samsung Washer provides maximum performance using a small amount of water. Since the water fill is not completed at the beginning of the wash, the amount of water may appear to be small. Also, the amount of time that water is supplied differs depending on the type of laundry, so the amount of water may seem small.
Samsung Washer: what to do if the fill was unsuccessful?
If your Samsung Washer has tried to fill but was unsuccessful, make sure the water faucets are open all the way. Also, check for kinked hoses and the inlet screens on the fill hoses.
Why does my Samsung Washer keep stopping?
If your Samsung Washer stops, plug the power cord into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. Check the screens on the inlet hoses at the faucets for obstructions.
Why Samsung Washer fills with wrong temperature water?
General| Energy Star Certified | Yes |
|---|---|
| Spin Speed | 1300 RPM |
| Steam Wash | Yes |
| VRT Technology | Yes |
| Type | Front Load |
| Color | White |
| Warranty | 1 Year Limited Warranty |
