Samsung WF365 Series - Page 10

ALIGNMENT AND ADJUSTMENTS
10
Board Input Test Mode
Denition of Board Input Test Mode:
- BoardInputTestModeistodisplaysaspeciedinputafterakeypress.
How to Enter:
- ToentertheBoardInputTestMode,presstheExtraRinsekeyduringServiceMode.
Board Input Test Mode:
1. ActivatetheServiceModerst.
2. PressthekeytostartBoardInputTest.
3.TurntheJog-DialsothatthenormalcourseLEDisturnedon,andTheWaterTemperaturewillbe
displayedinCelsius.
4.TurntheJog-DialsothattheHeavydutycycleLEDisturnedon,TheWaterTemperaturewillbe
displayedinFahrenheit.
5.TurntheJog-DialsothatthePermPresscycleLEDisturnedon,Thedoorstatuswillbedisplayed
(OPifopen,CLifclosed).
6. TurntheJog-DialsothatSanitizeLEDisturnedon,TheDoorLockSwitchstatuswillbedisplayed
(ULifunlocked,LOiflocked).
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
[BIGBANG]Technical_information-03207A-03_EN.indd 10 2013-7-16 17:15:07