Samsung WF42H5200AW - Special Wash Features

Troubleshooting _ 21
Error Type For USA Causes Remarks
Door Error
dE
- Aswitchcontacterrorbecauseofadeformationofthedoor
hook.
- Whenthedoorispulledbyforce.
Whenthedoorisnot
openedafterthedoor
open operation.
- ThisoccursintheBoilwashbecausethedoorispusheddue
toapressuredifferencefrominternaltemperaturechanges.
Whenthedoorisnot
lockedafterthedoor
closeoperation.
dE1
- Thedoorlockswitchterminalisconnectedincorrectly.
- Thedoorlockswitchterminalisbroken.
- Thisoccursintermittentlybecauseofanelectricwireleakage
- MainPCBfault.
Heater Error HE,HE1
- Thewashingheaterisshort-circuitedorhasawire
disconnected.
- Thewashingheaterinthetubhasanerror.
(Contacterror,temperaturesensorfault)
- Ifthewaterlevelsensoroperateswithoutwaterbecausewater
isfrozenorforanyotherreasonandthetemperaturesensor
engagedatthebottomtopreventoverheatingforthewashing
heaterdetectsatemperatureof100to150˚C,thewashing
machineturnstheinputpoweroff.
Iftheheaterhasno
error,thisoccurs
becauseofaPBArelay
malfunction.
Water Leakage
Error
LE
- Heaterengagementfault.(outofplace)
- Theairhoseisoutofplaceandwaterleakageoccursduring
thespincycle.
- Thetubbackatthesafetyboltsxingpartisbroken.
- Waterleakageoccursatthefrontwithfoamingbecauseoftoo
muchdetergent.
- Waterleakageoccursbecausetheconnectinghosetothe
detergentdrawerisconnectedincorrectly.
- Thedrainpumpltercoverisengagedincorrectly.
- Waterleakageoccursatthedrainhose.
- Theductcondensingholdingscrewsareworn.
- Thenozzle-diaphragmisengagedintheoppositedirectionor
therubberpackagingisomitted.
- Waterleakageoccursbecausethescrewsthatholdthetub
backandfrontinplacearefastenedincorrectly.
- Theleakagesensorisfaulty.
OverowError OE
- Waterissuppliedcontinuallybecausethewaterleveldetection
doesnotwork.
- Becausethedrainhoseiscloggedandthereisaninjection
error(atanarrowsection),thewaterleveldetectiondoesnot
workandwaterissuppliedcontinually.
- Waterissuppliedcontinuallybecauseoffreezingorbecause
thereisforeignmaterialinthewatersupplyvalve.
- Thiserrormayoccurwhenthewaterlevelsensorisdegraded.
Thiserroroccurs
becausethewater
levelsensorterminalis
outofplace.
Temperature
Sensor Error
tE1
- Thewashingheatersensorinthetubhasanerror.
(Contacterrorortemperaturesensorfault)
- Theconnectorisconnectedincorrectlyorisdisconnected.
- Ifthewaterlevelsensoroperateswithoutwaterbecausethe
waterisfrozenorforanyotherreasonandthetemperature
sensorengagedatthebottomtopreventoverheatingforthe
washingheaterdetectsatemperatureof100to150˚C,the
washingmachineturnstheinputpoweroff.
Heatersensorfault
:Whentheconnector
isconnected
incorrectlyorhasa
wiredisconnectedor
contact error
Unbalance Error UE
- Aslaundrycausesthiserror,checkthelaundry.
- Findthereasonfortheunbalanceandsolveitasdirectedin
theusermanual.
Foaming
Detected
SUd
- Thisoccurswhentoomuchfoamingisdetected.Itisalso
displayedwhilefoamingisremoved.Whentheremovalis
nished,thenormalcycleproceeds.
“Sud”or“SUdS”isdisplayedwhentoomuchfoamingis
detectedand“End”isdisplayedwhentheremovalofthe
foamingisnished.
(Thisisoneofthenormaloperations.Itisanerrorfor
preventingnon-sensingfaults.)