Samsung WF5000HA-PJT - Standard Disassembly Drawings

Removal and Reassembly _ 11
3-2. STANDARD DISASSEMBLY DRAWINGS
► Thisisastandarddisassemblydiagramandmaydifferfromtheactualproduct.
Usethismaterialasareferencewhendisassemblingandreassemblingtheproduct.
Part Figure Description
ASSY COVER TOP
1. RemovethetwoscrewsholdingtheTopCoverat
thebackoftheunit.
2. Removethetop-coverbyliftingitupafterpullingit
backabout15mm.
Noiselter
Watervalve
Sensor pressure
3. Withthetopcoverremovedyouwillnowhave
accesstoservicetheWaterpressuresensor,EMI
NoiseFilter,HotandColdWaterValves,Hose
DrawASSY.