English
English 45
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
1. Turn off the washer, and then unplug the power cord.
2. Gently press the top area of the filter cover to open.
3. Put an empty, spacious container around the
cover, and stretch the emergency drain tube to the
container while holding the tube cap (A).
4. Open the tube cap and let water in the Emergency
drain tube (B) flow into the container.
5. When done, close the tube cap, and reinsert the tube.
Then, close the filter cover.
NOTE
Use a spacious container because the water in the drum
may be more than expected.
Untitled-3 45 2022-06-10 4:12:08
To Next Page
Loading...
