EasyManua.ls Logo

Samsung WW6 A Series - Settings

Samsung WW6 A Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
English43
When the AddWash Door closes, the door seals up and no water can leak. However, you may encounter
what appears to be water leak around the door - some residual water remaining around the AddWash
Door may form water drops. This is normal.
Neither the main door or the AddWash Door can be opened when the water temperature is over 50 °C. If
the water level inside the drum is over a certain point, the main door cannot be opened.
If an information code of DDC appears on the display, see the “Information codes” section for further
actions.
Keep the AddWash Door and its surroundings clean at all times. Debris or detergents on or around the
seals of the AddWash Door may cause a leak.
Settings
Child Lock
To prevent accidents by children, Child Lock locks
all buttons except for Power.
To set the Child Lock function, hold down
Temp. and Rinse simultaneously for
3 seconds.
To release the Child Lock function, hold down
Temp. and Rinse simultaneously for 3
seconds.
NOTE
In the Child Lock state, you must first release
the Child Lock if you want to add detergent or
laundry.
Your setting will be kept even after restarting
the machine.
Alarm Off
You can turn on or off the melody of cycle
completion. However, the other sounds stay
active.
To mute the alarm, hold down Rinse and
Spin simultaneously for 3 seconds.
To unmute the alarm, hold down again for 3
seconds.
Untitled-8 43 2021-07-29  3:03:06

Related product manuals