• Unfastenthe6screwsthatholdtheback
coverinplace.Removethebackcoverby
slidingitdown.(Whenassembling,slidethe
backcoverup.)
1
2
1. RemovetheCoverback.
2. Separatethebeltandthenassembleit.
3. Checkifthebeltpositionisatthecenterof
thePulley.
Assemblingthebelt:
PlacethebeltaroundtheMotor-Pulley
(①)andthenoverthePulley(②).
1. Separatethewirehousingfromthemotor.
2. Removetheboltsholdingthemotoratthe
backofthewashingmachine.
3. Separatethemotor.
Wheninstallingthebeltaroundthemotor
pulley,thebottomofthebeltmustbe
locatedonthesecondtoothofthemotor
pulley.