6. RemovetheHeaterfromtheTub
InserttheHeaterintothecorrectposition
insidetheTubwhenreassemblingit.Risk
ofare.
Makesuretopushitinwardsuntilthe
packingpartcomesintotheTubcompletely
whenreassemblingitsothatthepacking
partiscompletelystucktotheTub.Fasten
theholdingnutwithaforceof5Kgf/cm
2
.If
thenutisnotfastenedproperly,watercould
leak.
● ReplacetheAssyKIT-MainandSubPCB
both.
MainandSubwillbesuppliedasone
AssyKit,notseperately.
4
1. Checkwhetherthereisanyinformationcodeinapplyingthepower.
2. CheckthevoltagebetweentheDC5VandGNDterminals.
3. Ifaninformationcodeoccurswhenthereisnocharacteristicinformationcodeinthe
electricharnesses,checkthesepoints.:
3C:Theresistanceofmotor(U-V/V-W/W-U)is4.8Ω.
HC/HC1:Theresistanceofheater(for2000Wunit)is25.19to27.84Ω.
DC1:Theresistanceofdoorswitchis500to1,500Ω.
5C:Theresistanceofdrainmotoris225.8to229.8Ω.
4C:Theresistanceofwatervalveis3.6to4.4kΩ.
Reassemblyisinthereverseorderoftheremoval.