65
Reset current parameter configuration to factory settings.
l Restore System Configuration
Reset current operating status of the system (or sending card, or receiving card) to the
status in the backup file.
l Back Up System Configuration
Back up current configuration parameters.
l Save System Configuration File
Save system configuration parameters as a file.
l Save
This is used to save the settings to a FLASH chip. The saved data won’t be lost even the
hardware is powered off.
Screen types include standard screen and complex screen. Configurations for different
types of screen will be given as follow
Attention: Usually we will make the connection table file and send it to the user, but if you
want use it, you must connect data cables according to data cable connection drawing
which the manufacturer provides. Otherwise you should make a new one for your own
connection. More operation details for Nova Control system should be check in software.
To Next Page
Loading...
