67
l Draw black lines and common color temperature points: When this option is selected, a
black line (color temperature curve) and common color temperature points (solid dots) are
shown.
l Original color space: It is suggested to use a light gun to measure current CIE
coordinates and brightness and fill out properly, use original color space as basis for
adjusting color temperature.
l Target color space: The black triangle in the color space on left side of the interface is
target color space, drag your mouse to change four-color target pixel.
It is also allowed to directly change all coefficients of the target color space, when
adjusting the target color space, preview the adjustment results on the LED screen until
satisfaction.
l PAL/NTSC: Standard system, click the button with your mouse, the target space will be
set to either PAL or NTSC system.
l Enable color space adjustment: After being checked, the target color space values can
be applied to the entire LED display.
l : Add color space information, save current color space as a customized color
space information to be called at any time in the future.
l : Delete selected customized color space information. Select customized color
space information to be deleted, click this button, the color space information will be
deleted.
l : Send current calibrated color space and target space to LED
display.
l : Save current calibrated color space and target space to hardware.
Color temperature table
To Next Page
Loading...
