78
bright lines.
The page for upload coefficients step 1
l Browse
Click this button to select the calibration coefficients database file to be uploaded.
l Type
The type of the selected calibration coefficients database is shown here. There are two
database types, screen database and cabinet database. A screen database contains
calibration coefficients for a whole display while a cabinet database contains calibration
coefficients for one or multiple cabinets.
l Cabinet ID
The cabinet ID(s) will be shown here if the selected is a cabinet calibration coefficient
database
l Columns
This is the column number of the calibration coefficient array of the selected database.
l Rows
This is the row number of the calibration coefficient array of the selected database.
Step 2 Click Next button to open the page for Step 2 after all settings.
This step is to specify the LED display area for which the calibration coefficients are to be
uploaded. There are three options, Screen, Pixel, Topology or List.
To Next Page
Loading...
