93
Erase or Reload Coefficients
l Erase coefficients: erasing calibration coefficients of the whole display or any
cabinets.
l Reload coefficients: reload the calibration coefficients lastly saved in hardware.
The page for erasing calibration coefficients
l Screen
Select this option to erase all calibration coefficients for the whole display.
l Topology or List
Select this option to select the cabinets from the cabinet array sketch or the cabinet list of
which the calibration coefficients are to be erased.
Note:
The calibration coefficients will be their default values after the
erase operation. Make a copy of the calibration coefficients (save
to a database file) for safety.
To Next Page
Loading...
