Samwha DSP DSP-DVR - The Order of Rotated Mode

calibration for
phase "L1"
voltage
*Possible to adjust with +,- 1V step size with 100V adjust
range
vsPE
to have a
calibration for
phase "L2"
voltage
0
vtPE
to have a
calibration for
phase "L3"
voltage
0
`
to change
Password
*Possible to enter new digit by using "UP" or "DN" key
after positioning a cursor on the required digit
*Press both "SET" & "CLR" key in order to come out
setting mode and the changed password is stored.
000
6. The order of Rotated Mode