6 S&C Instruction Sheet 662-510
Safety Information
Reorder Information for Safety Labels
Location Safety Alert Message Description Part Number
A
DANGER
Hazardous voltage —more than 400 volts . . . G-6503
B
DANGER
Storage and handling of spare fuses G-5147-2R1
C
DANGER
Switches may be energized . . . G-6501
D
DANGER
Keep away. . . G-6500
E
WARNING
Do not leave barrier in this position . . . G-6399
F
NOTICE
Hang this dual purpose barrier . . . G-9137
G
WARNING
Live switching with Uni-Rupter . . . G-6369
A
A
G
G
C
C
D
Hazardous voltage—more than 4000 volts.
Failure to follow these instructions will likely
cause shock, burns, or death.
• ALWAYS consider all circuits and component
parts live until completely de-energized, tested,
grounded, and tagged or properly identified.
• Do not work on or near this equipment
unless you:
(1) Know and obey your employer’s work
rules and S&C’s instruction sheets
d
(in
Compartment 1); and
(2) Know the hazards involved with this
high-voltage equipment.
• ALWAYS use proper personal protective
equipment, protective devices, and tools
suitable for the assigned task.
d Note: Additional instruction sheets are available free of charge
from S&C by calling (773) 338-1000.
DANGER
G-6503R1
DANGER
KEEP AWAY
Hazardous voltage—more
than 4000 volts.
Will shock, burn, or cause
death.
•Qualiedpersonsonly.
•Ifopen,immediatelycall
electriccompany.
G-6500
E
Do not leave barrier in this position
for more than one week.
Barrier damage could result
which can cause flashover and
injury.
G-6399
Location of Safety Labels