S&C TripSaver II User Manual

October 10, 2022
© S&C Electric Company 2014-2022, all rights reserved
Instruction Sheet 461-504
TripSaver
®
II Cutout-Mounted Recloser
Outdoor Distribution (15 kV and 25 kV)
For Overhead Distribution Systems
Protection Setup Using
Service Center Conguration Kit
Table of Contents
Introduction ................................ 3
Qualified Persons ........................... 3
Read this Instruction Sheet ................... 3
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . . 3
Proper Application .......................... 3
Warranty .................................. 4
End User License Agreement .................. 4
Safety Information .......................... 5
Understanding Safety-Alert Messages ........... 5
Following Safety Instructions .................. 5
Replacement Instructions and Labels ........... 5
Safety Precautions ......................... 6
Shipping and Handling
...................... 7
Packing ................................... 7
Inspection ................................. 8
Handling .................................. 8
Installing TripSaver
®
II Service Center
Configuration Software Version 2.0
.......... 9
Computer Requirements ..................... 9
Downloading Software ....................... 9
Software Installation .........................10
Installing the USB Transceiver and Power
Supply
.................................... 14
Assembling and Installing the USB Transceiver ....14
Assembling the Power Supply and Powering the
TripSaver II Recloser ......................15
Obtaining the Transceiver ID ..................16
Using TripSaver
®
II Service Center
Configuration Software Version 2.0
......... 18
Launching the Software ......................18
Reading and Understanding the Warning Message 18
Terminology ...............................18
Overview ..................................19
Menu Bar Functions ........................ 24
File Menu .................................25
Open Snapshot ............................ 25
Close Snapshot ........................... 26
Save Snapshot ............................ 27
Load Setpoints ............................ 28
Save Setpoints ............................ 29
Exit ..................................... 29
Connection Menu .......................... 30
Connect to Device ......................... 30
Disconnect ............................... 32
Data Menu ................................ 33
Validate .................................. 33
Apply .................................... 35
Revert ................................... 36
Tools Menu ................................ 37
Options .................................. 37
Create Report ............................. 38
Firmware Update .......................... 39
USB Transceiver Firmware Update ............ 43
Restore Profile ............................ 46
Clear “Service Now” ........................ 46
TABLE OF CONTENTS CONTINUED ▶

S&C TripSaver II Specifications

General

Brand	S&C
Model	TripSaver II
Category	Industrial Electrical
Language	English