6 S&C Instruction Sheet 461-504
Safety Precautions
WARNING
Failure to properly configure a TripSaver II recloser in accordance with applicable codes
and standards can result in misoperation or miscoordination, equipment damage, personnel
injury, or death.
Settings should be determined and approved by qualified personnel who are familiar with
the principles of selective coordination and system protection. S&C Electric Company is not
responsible for the misoperation or miscoordination of a TripSaver II recloser resulting from
improper configuration.
Make sure the TripSaver II recloser settings files are maintained in a secure manner by
properly trained personnel.
WARNING
The TripSaver II Cutout-Mounted Recloser MUST be de-energized and removed
from the utility pole before attaching the “corded” power module (power module
with ac adapter and extension cord) to the base of the TripSaver II recloser. The
corded power module is ONLY intended to be used for setup and data collection
when the TripSaver II recloser is de-energized and removed from the utility pole.
(To provide power to a TripSaver II recloser while it is mounted to the pole, use
the cordless power module, S&C catalog number 5954.) Failure to remove the
TripSaver II recloser from the utility pole before connecting the corded power module can
cause arcing, burns, electric shock, and death.