December 16, 2019
© S&C Electric Company 2012-2019, all rights reserved
Instruction Sheet 461-502
TripSaver
®
II Cutout-Mounted Recloser
Outdoor Distribution (15 kV and 25 kV)
Installation and Operation
Table of Contents
Section Page Section Page
Introduction
Qualified Persons ........................... 2
Read this Instruction Sheet ................... 2
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . . 2
Video ..................................... 2
Proper Application .......................... 2
Warranty Provisions ......................... 2
Warranty Qualifications ...................... 3
Application Note ............................ 3
Safety Information
Understanding Safety-Alert Messages ........... 4
Following Safety Instructions .................. 4
Replacement Instructions and Labels ........... 4
Location of Safety Label ..................... 5
Safety Precautions ......................... 6
Shipping and Handling
Packing ................................... 7
Inspection ................................. 7
Handling .................................. 7
Storage ................................... 7
Returning ................................. 7
Battery Shelf Life ........................... 7
Installation
Installing a TripSaver II
Cutout-Mounted Recloser .................. 8
Removing a TripSaver II
Recloser from Its Mounting .................13
Operation
If the TripSaver II Recloser Has Dropped Open ....14
If Line Work Is to Be Performed Downstream
of a TripSaver II Recloser ...................14
Display Screen .............................15
Additional Screens ..........................18
Factory Default Settings ..................... 20
Operation with Loadbuster®—
The S&C Loadbreak Tool ...................21
Local Manual Open—TripSaver II
Loadbreak Function ...................... 25
Understanding the Active TCC Curve When the
TripSaver II Recloser is in Remote Non-Reclose
(R-NR) Mode ........................... 27
Understanding Gang Operation When a
TripSaver II Recloser is Connected to a
Communication Gateway .................. 28
Troubleshooting
In Mounting with Contacts Open .............. 29
Manually Resetting a TripSaver II Recloser ...... 29
Initiating Display Screen Using a 9-Volt Battery ... 30
End of Interrupting Capability and Service
Now Screen ............................ 30
Unable to Close a TripSaver II Recloser Into Its
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
LCD Performance at Extremely Low
Temperatures ............................31
Battery Abnormality LCD Indicator ..............31
Appendix A
Regulatory Information ...................... 32
United States of America – FCC. . . . . . . . . . . . . . . 35
Canada – ISED ............................ 35
Australia/New Zealand ...................... 35
Brazil .................................... 36
South Korea .............................. 36
To Next Page
Need help?
General
