S&C TripSaver II Installation And Operation

2 S&C Instruction Sheet 461-502
Introduction
Qualified Persons
WARNING
The equipment covered by this publication must be installed, operated, and
maintained by qualified persons who are knowledgeable in the installation,
operation, and maintenance of primary distribution fusing equipment along with
associated hazards. A qualified person is one who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach
distances corresponding to the voltages to which the qualified person will be
exposed
• The proper use of the special precautionary techniques, personal protective
equipment, insulating and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended only for such qualified persons. They are not
intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment.
Read this
Instruction Sheet
Thoroughly and carefully read this instruction sheet before installing or operating your
TripSaverII Cutout-Mounted Recloser. The latest version is available online in PDF format
at sandc.com/en/support/product-literature/.
Familiarize yourself with Safety Information and Safety Precautions on pages 4 through 6.
Retain this
Instruction Sheet
This instruction sheet should be available for reference wherever TripSaver II Cutout-
Mounted Reclosers are used. Retain this instruction sheet in a location where you can
easily retrieve and refer to it.
Video
A video of the installation and operation procedures in this instruction sheet is available
at sandc.com/videos/install-ts2. The goal of the video is to provide a clear and simple
visual reference. In no way is the video meant as a complete replacement of these written
instructions.
Proper Application
WARNING
The TripSaver II Cutout-Mounted Recloser must only be used for a specific
protection application that is within the ratings of the model selected. Ratings for
the TripSaver II Cutout-Mounted Recloser can be found in Specification Bulletin
461-33. TripSaver II recloser ratings also are laser-etched on the recloser.
Warranty Provisions
The warranty and/or obligations described in S&C’s standard conditions of sale, as set
forth in Price Sheet 150, plus any special warranty provisions, as set forth in the applicable
product-line specication bulletin, are exclusive. The remedies provided in the former
for breach of these warranties shall constitute the immediate purchaser’s or end user’s
exclusive remedy and a fulllment of all the seller’s liability. In no event shall the seller’s
liability to the immediate purchaser or end user exceed the price of the specic product
that gives rise to the immediate purchaser’s or end user’s claim. All other warranties,
whether express or implied or arising by operation of law, course of dealing, usage of
trade or otherwise, are excluded. The only warranties are those stated in Price Sheet 150,
and THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. ANY EXPRESS WARRANTY OR OTHER
OBLIGATION PROVIDED IN PRICE SHEET 150 IS GRANTED ONLY TO THE IMMEDIATE
PURCHASER AND END USER, AS DEFINED THEREIN. OTHER THAN AN END USER,
NO REMOTE PURCHASER MAY RELY ON ANY AFFIRMATION OF FACT OR PROMISE
THAT RELATES TO THE GOODS DESCRIBED HEREIN, ANY DESCRIPTION THAT
RELATES TO THE GOODS, OR ANY REMEDIAL PROMISE INCLUDED IN PRICE
SHEET 150.

S&C TripSaver II Specifications

General

Brand	S&C
Model	TripSaver II
Category	Industrial Electrical
Language	English